50 by 50 by 15 Angle bracket

Product Description

The 50 x 50 x 15 mm angle bracket is a compact L-shaped metal connector. It is designed to reinforce 90-degree joints in woodworking, furniture assembly, and light construction projects.

The dimensions indicate that each leg of the bracket is 50 mm long. The width of the metal strip is 15 mm.

This versatile bracket is commonly used for strengthening chair frames, securing shelving, repairing furniture corners, and bracing small timber structures.

What Do the Dimensions 50 x 50 x 15 mm Mean?

A common question is how to interpret the three numbers.

50 by 50 by 15 Angle bracket

The 50 x 50 mm measurement refers to the length of the two perpendicular legs that attach to the wooden components. The 15 mm measurement is the width of the metal strip itself.

This configuration creates a narrow, unobtrusive profile. It is ideal for smaller timber pieces or applications where a wider bracket would be visually or physically intrusive.

What Material and Thickness is This Bracket Made From?

The corner brace is typically manufactured from high-quality galvanized steel. This offers excellent resistance to rust and corrosion.

The material thickness generally ranges from 1.5 mm to 2 mm. This provides a reliable balance between robust holding power and ease of installation.

The galvanized finish makes the bracket suitable for both indoor applications like furniture and outdoor projects where moisture exposure is a concern.

What Are the Pre-Drilled Hole Specifications?

Most brackets come with pre-drilled holes to facilitate easy and secure fastening. The holes typically measure between 3.5 mm and 5 mm in diameter.

50 by 50 by 15 Angle bracket

While the bracket itself is ready to install, screws are generally sold separately. This allows you to choose the appropriate length and type for your specific wood thickness and application.

How Do You Install a 50 x 50 x 15 mm Angle Bracket?

Installation is straightforward and requires only basic tools.

To install, position the bracket firmly against the inside corner of the two timber pieces. Use a pencil to mark the screw hole locations. Then drill pilot holes into the wood to prevent splitting.

Finally, secure the bracket using countersunk wood screws of an appropriate length. The 90-degree angle of the bracket automatically helps ensure that your joint remains square during assembly.

What are the Typical Applications for the 50x50x15 mm Bracket?

The compact size of this bracket makes it an incredibly versatile component.

It is excellent for reinforcing chair and table legs, securing light shelving units, repairing broken wooden picture frames or drawers, and stabilizing timber joints in DIY hobby projects.

The narrow 15 mm width allows it to be used on thinner materials where larger brackets would not fit properly. This makes it a staple hardware item for both professional joiners and DIY enthusiasts.

50 by 50 by 15 Angle bracket available in Mombasa, Kwale, Kilifi, Lamu, Mandera, Marsabit, Isiolo, Meru, Embu, Kitui, Machakos, Makueni, Nyandarua,

Nyeri, Kirinyaga, Murang’a, Kiambu, Turkana, Samburu, Trans Nzoia, Uasin, Gishu, Elgeyo Marakwet, Nandi, Baringo,

Laikipia, Nakuru, Narok, Kajiado, Kericho, Bomet, Kakamega, Vihiga, Bungoma, Busia, Siaya, Kisumu, Homa Bay, Migori, Kisii, Nyamira, Nairobi.

In Nairobi you can find them at: Westlands, Dagoretti,  Lang’ata, Starehe, Kamukunji, Embakasi, and Kasarani, Kibera, Mathare,

Eastleigh, Karen, Lavington, Westlands, Parklands, Runda, South C, South, Ngong Road

In Mombasa you can find us at : Nyali, Mwembe Tayari, Majengo, Likoni ,Bamburi, Miritini