Product Description

Professional Precision for Flawless Drawer Fronts

Installing drawer fronts is one of the most visible and unforgiving tasks in cabinet making. A gap that is 1mm off or a front that sits slightly crooked is immediately noticeable and undermines the entire look of a kitchen or bathroom. The W-Type Drawer Face Setter is a professional-grade alignment fixture designed to eliminate guesswork and deliver perfectly straight, evenly spaced drawer fronts every single time. Whether you are a professional cabinet installer, a furniture maker, or a serious DIY enthusiast, this tool transforms a frustrating two-handed balancing act into a simple, repeatable process.

The W-Type designation refers to the distinctive W-shaped folding frame that provides a stable, adjustable base for aligning drawer faces across a wide range of cabinet sizes, from small drawer frames to larger cabinet panels. Unlike makeshift jigs or single-handed clamps, this setter holds the drawer front securely in position while you fasten it, freeing both hands to drive screws and ensuring the front stays flush and square.

PRICE PER PIECE

Key Features and Benefits

W-Frame Stability and Adjustability

The W-Type Drawer Face Setter is engineered for rigidity and flexibility. It folds and adjusts to fit different furniture sizes, providing a stable platform that resists flexing under clamping pressure. This is critical when working with wider or heavier drawer fronts, where a flimsy jig would allow the front to shift during fastening.

GripMaxx Anti-Slip Surface

The clamp pads feature a GripMaxx anti-slip surface that holds the drawer front and cabinet carcass securely without marring or scratching finished surfaces. This means you can work confidently on painted, veneered, or laminated fronts without worrying about damage.

Consistent Gaps and Reveals with Spacer Shims

The W-Type Drawer Face Setter includes a comprehensive set of seven setup and spacer shims in multiple thicknesses, including 3/32″, 1/8″, 1/4″, and 3/4″. These shims can be stacked and combined to dial in precise gaps and reveals, ensuring every drawer front lines up perfectly with its neighbors across a run of cabinetry.

Alignment Marks and Large Adjustment Knobs

Built-in alignment marks provide visual reference points for accurate placement and repeatable layouts from drawer to drawer. Large adjustment knobs allow for fingertip control when tightening or loosening the jig, speeding up repositioning as you move through multiple drawer fronts on a job.

Heavy-Duty Construction

The thick steel design with ribbed corners resists flex under clamping pressure, keeping drawer fronts stable during fastening and reducing the chance of shifting. This durability ensures the tool withstands the rigors of professional job-site use.

Technical Specifications

Applications

• Kitchen Cabinet Installation: Aligning and securing drawer fronts on new kitchen units.

• Bathroom Vanities: Ensuring precise gaps on bathroom cabinetry.

• Furniture Making: Professional workshop use for consistent results.

• Renovation and Repair: Replacing or re-aligning drawer fronts on existing cabinets.

• DIY Cabinetry: A user-friendly tool for homeowners tackling drawer front installation.

W-Type Drawer Face Setter holding a drawer front flush against a cabinet carcass

Installation Guide

Tools Required: Screwdriver or drill (for fastening drawer fronts), tape measure (optional, for initial setup).

Step 1: Position the Drawer Front
Place the drawer front against the drawer box, using the spacer shims to set the desired gap and reveal on the bottom and sides.

Step 2: Attach the W-Type Setter
Engage the W-frame setter over the drawer front and box. The GripMaxx pads should contact the surfaces securely.

Step 3: Tighten the Knobs
Turn the large adjustment knobs to snug the jig against the workpiece. The thick steel frame and ribbed corners will resist flexing, holding the front firmly in place.

Step 4: Verify Alignment
Check that the drawer front is level and the gaps are consistent on all sides using the built-in alignment marks as a reference.

Step 5: Fasten the Front
With the setter holding the panel securely, drive the screws through the drawer box into the front. The fixture prevents any shifting during this process.

Step 6: Release and Repeat
Loosen the knobs to release the setter, then move to the next drawer. The consistent clamping action ensures uniform results across all drawers.

Maintenance and Care

• Cleaning: Wipe the W-Type Drawer Face Setter setter with a dry cloth after use to remove dust and debris. Avoid leaving it in damp environments to prevent corrosion.

• Inspection: Check the shims and clamp pads periodically for wear. Replace if the anti-slip surface loses grip or the shims become damaged.

• Storage: Store in a toolbox or dry location to protect from moisture and impact. The folding W-frame design allows for compact storage.

For precise, efficient, and professional drawer front installation, the W-Type Drawer Face Setter is the tool that delivers consistent, gap-perfect results every time.

W-Type Drawer Face Setter  is available in Mombasa, Kwale, Kilifi, Lamu, Mandera, Marsabit, Isiolo, Meru, Embu, Kitui, Machakos, Makueni, Nyandarua,

Nyeri, Kirinyaga, Murang’a, Kiambu, Turkana, Samburu, Trans Nzoia, Uasin, Gishu, Elgeyo Marakwet, Nandi, Baringo,

Laikipia, Nakuru, Narok, Kajiado, Kericho, Bomet, Kakamega, Vihiga, Bungoma, Busia, Siaya, Kisumu, Homa Bay, Migori, Kisii, Nyamira, Nairobi.

In Nairobi you can find them at: Westlands, Dagoretti,  Lang’ata, Starehe, Kamukunji, Embakasi, and Kasarani, Kibera, Mathare,

Eastleigh, Karen, Lavington, Westlands, Parklands, Runda, South C, South, Ngong Road

In Mombasa you can find us at : Nyali, Mwembe Tayari, Majengo, Likoni ,Bamburi, Miritini