360 ° furniture swivel plate-8 inch
360° Butterfly Door Hinges
38MM HANGING SLIDING GATE ROLLER WHEELS
3cm pic hook 20pcs
3cm pic hook 20pcs
Key Features
• 20-Piece Bulk Value Pack: Complete set of twenty identical white picture hooks; sufficient for multiple frames, gallery walls, or whole-home hanging projects.
• 3-Pin Hardened Steel Axle System: Three integrated steel pins per hook distribute load across multiple penetration points; significantly enhances pull-out resistance compared to single-nail designs.
• Verified 3kg Load Capacity: Each hook safely supports frames, photos, and small mirrors up to 3kg (6.6lbs) when installed into solid wood, brick, or dense plaster.
• Compact 25mm x 15mm Footprint: 2.5cm (25mm) overall length; closest commercially available size to requested 3cm dimension. Minimal visual impact on finished walls.
• Durable White Plastic Body: UV-stabilised polymer resists yellowing and maintains structural integrity under normal indoor conditions; blends with most wall colours.
• Hammer-Driven Installation: Simple tool requirement; position hook and strike firmly until pins are fully seated. No pre-drilling required for suitable substrates.
• Wide Application Compatibility: Ideal for hanging photographs, paintings, clocks, small mirrors, lightweight ornaments, and decorative plates.
• Surface Suitability: Compatible with solid timber, hardwood, brick, masonry, and dense plaster. Not for hollow drywall, tile, or soft plasterboard without supplementary fixings.
• Corrosion-Resistant Pins: Hardened steel axles treated to resist rust and maintain gripping power over decades of service.
3inch rubber castor wheel
3inch rubber castor wheel
Key Features:
• 3-inch diameter rubber tire for smooth, quiet rolling and floor protection
• Integrated 360-degree swivel plate with ball bearing for full maneuverability
• Durable nylon/polypropylene wheel hub and sturdy steel swivel housing
• Easy top-plate mounting with pre-drilled holes for simple DIY installation
• Suitable for dynamic loads of approximately 25-30 kg (55-66 lbs) per wheel
• Non-marking rubber tire prevents scratches on hardwood, tile, and laminate floors
• Provides excellent shock absorption for a smoother ride over minor floor imperfections
• Ideal for building and upgrading trolleys, carts, and mobile furniture
• Versatile size suitable for a wide range of home, workshop, and light commercial uses
3M heavy duty dead lock
3M heavy duty dead lockÂ
Key Features:
• 3-inch (76mm) lock body or bolt size for deep engagement and secure holding power
• Available in single cylinder (key exterior, thumbturn interior) or double cylinder (key both sides) configurations
• Anti-drill hardened steel pins and anti-pick security pins for enhanced protection
• Available in solid brass, zinc-plated steel, satin chrome, and stainless steel finishes
• Grade 1 ANSI/BHMA certified for maximum durability (500,000+ cycles) on premium models
• Anti-snap technology on select models to prevent cylinder snapping attacks
• Heavy-duty strike plate with 3-inch or longer screws for deep frame penetration
• Supplied with 3-5 keys for convenient access
• Suitable for commercial, industrial, and high-security residential doors
3mm hss drill bit
3mm hss drill bit
Key Features:
• Premium High-Speed Steel Construction: Made from M2 grade HSS or cobalt-alloyed HSS-E for superior hardness, heat resistance, and long tool life .
• Precision Ground Options: HSS-G bits feature precision-ground flutes for excellent concentricity, sharper cutting edges, and accurate hole diameter tolerance to h8 grade .
• Multiple Point Angles: Available in 118° standard point for general drilling or 135° split point for self-centering and reduced walking on curved surfaces .
• Wide Material Compatibility: Effectively drills through mild steel, alloyed steels, cast iron, stainless steel (cobalt models), aluminum, brass, wood, and plastics .
• Various Length Options: Standard jobber length (61mm overall, 33mm working) for general use; long series (130mm) for deep hole applications .
• Protective Coatings: Black oxide, bronze oxide, or gold ferrous oxide finishes reduce friction, prevent chip buildup, and enhance corrosion resistance .
• No-Slip Shank Designs: Round shank for universal compatibility or 3-flat anti-slip shank for positive grip and elimination of chuck slippage .
• No-Walk Tip Technology: Advanced split point geometry on premium models allows easier penetration without center punching .
• Available in Multiple Pack Sizes: Choose from single bits, 2-packs, 10-packs, or larger multipacks to match your usage requirements .
• Manufactured to International Standards: Compliant with DIN 338, BS328, ISO 235, and ANSI B94.11 specifications for guaranteed quality .
3MTR SLIDING WARDROBE TRACK-BOTTOM
3mtrs C golla cabinet handle
3mtrs C golla cabinet handle
Key Features:
• Creates a seamless, true handleless kitchen aesthetic with flush cabinet surfaces
• Specifically designed for horizontal installation between doors and stacked drawers
• Premium aluminum construction ensures durability, strength, and a high-end feel
• Available in a 3-meter (3000mm) length for flexibility and custom cutting to size
• Wide range of premium finishes including Matt Black, Silver, Brass, Copper, and White
• Smooth, easy-to-clean surface avoids the dust-trapping issues of carved door grooves
• Part of a comprehensive Gola system for a fully integrated kitchen design
• Provides a comfortable and discreet finger recess for effortless opening
• Requires separate purchase of matching connectors and end caps for a finished look
• Ideal for contemporary, minimalist, and European-style kitchen designs
3mtrs PVC skirting
3mtrs PVC skirting
Key Features:
• 3-meter continuous length – Covers larger wall runs with fewer joins; cut-to-size with scissors
• 27mm x 20mm L-profile – Compact, low-profile skirting ideal for modern interiors, tiled edges, and door frames
• Flexible PVC construction – Easily conforms to slight wall irregularities; 100% waterproof and humidity resistant
• Self-adhesive backing – No nails, screws, or separate glue required; instant grab adhesive with protective film
• Tool-free installation – Cut with scissors or craft knife; install in minutes with no professional experience
• Smooth white finish – Ready-to-use; no painting, sanding, or sealing required; easy wipe-clean surface
• Wide application versatility – Suitable for floors, walls, ceilings, doors, windows, kitchens, bathrooms, and furniture
• Cost-effective alternative – Significantly cheaper than timber or MDF when factoring in installation and finishing costs
• Rent-friendly solution – Removable without major wall damage when properly installed on smooth surfaces
3pc 2′ masking tape
