50MM Mindy Padlock
50mtrs measuring laser
50mtrs measuring laser
Key Features:
• 50-Metre Maximum Range: Measures from 0.05m up to 50m (165ft) with ±1.5-2.0mm typical accuracy—suitable for residential, commercial, and light industrial applications.
• Ultra-Compact Pocket Design: Weighs only 100 grams (0.22lbs) with dimensions 116 x 53 x 25mm; easily slips into shirt pocket or tool pouch without bulk.
• Multi-Function Calculation Modes: Direct distance, continuous tracking, area, volume, and 2/3-point Pythagoras indirect height measurement—no manual math required.
• IP54 Dust & Splash Protection: Fully sealed against job site dust and resistant to water spray; reliable performance in challenging indoor environments.
• 5-Measurement Memory Recall: Automatically stores last five readings; accessible even after power cycle for convenient on-site recording.
• Auto Power Management: Laser auto-off at 90 seconds, unit auto-off at 180 seconds; extends battery life to approximately 8,000 measurements per battery set.
• Bright 635nm Red Laser: Class 2 laser diode produces sharp 6mm spot at 10m; visible under most indoor lighting conditions for precise targeting.
• Front/Rear Reference Selection: User-selectable measurement基准 from front edge or rear bracket for maximum versatility in corners and recesses.
• Complete Kit Inclusion: Supplied with soft pouch, wrist strap, target plate, and 2x AAA alkaline batteries—ready to use straight from the box.
50mtrs measuring tape
50mtrs measuring tape
Key Features:
• Full 50-metre (165-foot) length for large-scale distance measurement
• Available in durable steel or flexible, non-conductive fibreglass blade materials
• Professional-grade accuracy, typically EC Class II or premium EC Class I
• Open-reel or open-frame design for easy cleaning and maintenance
• Folding metal end hook for secure anchoring during use
• Protective blade coatings (e.g., nylon, polyester) on many models for added durability
• Metric and Imperial (feet & inches) markings on most tapes for versatility
• Impact-resistant case designed to withstand jobsite conditions
• Offered by reputable brands including Hultafors, Bahco, Lufkin, and Silverline
50x50x35 mm corna brace
50x50x35 mm corna brace
Key Features:
• L-shaped 90-degree design with 50mm legs and 35mm width for secure right-angle timber connections
• Manufactured from heavy-duty galvanised steel (Sendzimir, DX51D+Z275, or zinc-plated) for corrosion resistance
• Material thickness of 2mm to 2.5mm provides excellent strength and durability
• Pre-drilled holes (typically 7 x Ø5mm and 1 x Ø9mm) for versatile fastening with screws, nails, or bolts
• Reinforced/embossed design on many models increases rigidity and load-bearing capacity
• Weather-resistant finish suitable for both indoor and outdoor applications
• Ideal for timber construction, garden sheds, carports, furniture assembly, and shelving support
• Compatible with wood screws (ø6/10mm), nails (ø4mm), bolts (M10/M12), and concrete anchors
• Available in multiple pack sizes from 4 to 100+ pieces to suit any project scale
• CE marked options available for compliance with European safety standards
55MM HANGING SLIDING GATE ROLLER WHEELS
56mm Toggle latch
56mm Toggle latch
Key Features:
• Spring-loaded over-center mechanism provides powerful, vibration-resistant clamping force
• High-quality stainless steel construction for corrosion resistance, high-temperature tolerance, and long-lasting durability
• Smooth, polished edges eliminate sharp points for safe handling during installation and use
• Includes both the latch and the matching strike plate for a complete, secure fit
• Available in multi-packs (4, 8 pieces) with screws included for a complete hardware kit
• Ideal for toolboxes, flight cases, cabinets, drawers, chests, and storage trunks
• Compact 56mm (2.2 inch) body size suitable for small to medium cases and boxes
5inch parliament hinges
5inch parliament hingesÂ
Key Features
• 5-Inch Total Projection: Provides 3 inches of clearance from architraves and skirting boards, allowing doors to swing a full 180 degrees.
• Premium Ball-Bearing Mechanism: Lubricated bearings in the knuckle eliminate friction, prevent sagging, and ensure whisper-quiet operation for decades.
• Grade 304 Stainless Steel Construction: Superior corrosion and rust resistance compared to mild steel; ideal for coastal areas and high-humidity environments.
• 3mm Thick Leaves: Substantial material gauge provides maximum screw-holding power and resists door droop over time.
• Supplied as a Pair: Includes two complete hinges with matching high-quality stainless steel wood screws.
• Versatile Finish Options: Available in Polished Nickel, Satin Stainless Steel, Pewter, Polished Chrome, Black, and Polished Bronze to match any hardware scheme.
• Reversible Design: Suitable for both left-hand and right-hand door installations.
5x75mm chip board screws
6 by 8 shelf bracket -2pc
6 by 8 shelf bracket -2pc
Key Features:
• L-shaped design with 6-inch vertical leg and 8-inch horizontal arm for compact shelving applications
• Durable stamped steel construction with powder-coated or enamel finish for corrosion resistance
• Available in multiple finishes: white, black, and gray to match any decor
• Safe working load ranging from 20 to 100 lbs per bracket depending on model selection
• Features multiple screw holes (typically six per bracket) for enhanced holding power
• Easy to install with basic tools (drill, screwdriver, level, measuring tape)
• Designed to fit standard lumber widths up to 9 inches deep
• Ideal for closets, kitchens, pantries, garages, sheds, and offices
• Compact size perfect for smaller spaces where larger brackets would be overwhelming
• Convenient 2-pack configuration saves time and ensures matching hardware
6 inch display hook
6 inch display hook
Available in Multiple Mounting Styles
Choose from gridwall, slatwall, pegboard, and direct wall mount. Maximum versatility for any display system.
Premium-Grade Stainless Steel
5mm thick rod provides exceptional durability and corrosion resistance. Built for long-lasting performance.
Heavy-Duty Iron Models
Painted coating resists rust and holds up to 15-20 pounds. Reliable strength for demanding applications.
15° Tilt Angle on Gridwall Hooks
Prevents items from sliding off displays. Keeps merchandise secure and organized.
Protective Round Caps
Select models feature caps to prevent scratches to hands and merchandise. Adds safety and protects products.
Multiple Pack Sizes
Available in 5, 12, 25, 32, 35, and 50 pieces. Choose the right quantity for any project scale.
Versatile Finish Options
Choose from stainless steel, polished chrome, black painted, white, gold, and silver. Match any display aesthetic.
Complete Hardware Sets
Screws and wall plugs included with wall-mount models. Everything needed for immediate installation.
6 inch fixed industrial castor wheel
6 inch lirlee round metallic shower head
6 inch lirlee round metallic shower head
Key Features:
• Generous 6-inch diameter for full-body rainfall coverage
• Premium metallic construction with brilliant chrome finish
• 144 self-cleaning silicone jets prevent mineral buildup
• Adjustable ball joint for customizable spray direction
• Water-saving design with optional flow restrictor (2.5 GPM)
• Easy installation fits standard 1/2-inch shower arms
• Includes all necessary installation components
• Durable construction with corrosion-resistant finish
• Creates luxurious spa-like shower experience
• Ideal for bathroom upgrades and rental property improvements
